LED-Light, LED-Spot, LED-Bulb, LED-Deocoration and many other LED products with best quality
We offer high quality LED-Lights, LED-Lamps and LED-Spots at best prices
In our store www.led-light-24.com you will find many different kinds of LED-Lamp, LED Light and RGB LED Strip which have low power consumption.
LED (Light Emitting Diode) tube lights are soon advancing to become the forefront of traditional lighting, that consist of fluorescent tube lights and CFLs (Compact Fluorescent Lamps). LED tube lights have a low luminous intensity, therefore they offer better distribution of light as compared to other sources of light and the intensity of glare too is reduced to a greater extent. They are energy efficient and more durable than other traditional sources of light, hence it makes sense to save in frugal electricity bills and replacement costs. LED lighting works on the lines of green technology, that is they create less carbon emissions and do not con tain toxic mercury or any hazardous elements. Moreover, you don't have to worry about getting the entire wiring system changed; a few simple modifications in the existing fixtures will serve the purpose. So, the next time you happen to change your existing tube light, make sure you consider installing LED tube lights.
Installing LED Tube Lights
* When you get started with installing LED tube lights in place of fluorescent tube lights, you will realize there are three main components; the ballast, the starter and the tube light that you have to get rid off. Now, the starter may not be a separate component in the entire circuit and is sometimes built in the ballast itself.
* Remove the old bulbs from the fixtures and make sure the electricity or the mains to the whole fixture is turned off while doing so. You may need simple tools like screw drivers, wires, wire stripper and cutter, some nuts and bolts; keep them all handy.
* Once the old bulbs or tube lights are taken off you will have to remove the reflector that encloses the wiring and the ballast as well. Usually, it is simple to detach the reflector, you may use the screw driver to remove this, in case it is fixed using screws otherwise you can use a wire stripper to just pull out the reflector.
* Now , you have to get rid of the ballast and starter (if present). The ballast will have two screws holding it, just unscrew them using a screw driver and dispose it off. While doing so, the wiring attached to it would also be removed. Reconnect the wires in the fixture so as to complete the circuit.
* You are almost there! Fix the reflector back in its place covering the wiring work and insert the LED tube lights in the sockets. Now, while inserting the LED tube lights you ought to be sure of the top and bottom ends, and have to be fixed into the circuit likewise. If you are unable to identify the top and bottom refer to the instructions manual provided by the manufacturer.
* Once you are done with installing the LED tube light in the fixture, turn on the mains or electricity. If all the connections are proper and the fittings are done in the correct manner, you will have a better illumination. Your project does not end here, it is important that you dispose off the old fluorescent bulbs or tube lights properly according to the local regulations. Since, these bulbs contain small amounts of toxic mercury, that are highly hazardous.
iAutoblog the premier autoblogger software
No comments:
Post a Comment